GR6 gearset assembled on the stand in front of the VOLKOV Motors logo
GR6 · Built in-house

GR6 transmission

A fast R35 GT-R is nothing without a strong gearbox. Forged GR6 builds, servicing and upgrades, proven in championship-winning, lap-record-breaking Time Attack UK events, on the road, and with low 8-second quarter miles. All on the same gearbox.

Watch this before your next service

GR6 valve body service

One of the most overlooked jobs on an R35 GT-R. It isn't part of the standard service schedule, but we believe it should be, and we always advise it.

Over time, metal debris builds up inside the valve body. That means slower shifts, inconsistent gearbox behaviour and small problems that turn into big ones.

We take the valve body fully apart, test every electronic part, clean the whole mechanical assembly and rebuild it. The result is the fastest, crispest shifts your GR6 can give, and a gearbox protected for the long run.

Oil flush on a GR6? No go. A valve body service is the one.

  • Full disassembly, inspection and cleaning
  • All electronics tested
  • Filters replaced and additional magnets fitted
  • OEM gasket and quality oil
  • Photos and videos of your valve body sent to you
In-house builds

Building a stronger GR6

We only use tested, proven components. Our forged GR6 builds use upgraded gearsets and clutch packs chosen for your power level, and every unit is blueprinted, upgraded and built entirely in-house.

Road, track or drag: we spec the box for your power and how you drive.

Proven in Time Attack UK and at Race Wars UK, with consistent 8-second quarter miles and full-mile passes.

A GR6 transmission being built on the bench at VOLKOV Motors
On the bench

Every part, laid out and checked

Clutch drums, hubs, pistons and friction packs are stripped, measured and inspected before anything goes back together. Nothing is guessed.

GR6 clutch drums, pistons and friction plates laid out on the bench at VOLKOV Motors
In the workshop

Stripped, rebuilt and torqued by hand

Forged GR6

Building a GR6 for big power

The stock GR6 has its limits

The factory box handles around 800bhp. Beyond that, the stock internals become a known failure point under hard launches and aggressive use.

Forged gearsets

Proven, forged gearsets chosen for extreme torque and long-term durability.

Clutch and basket upgrades

Heavy-duty clutches, billet baskets and reinforced components to handle aggressive launches and big power.

TCM calibration

We custom-tune the TCM for clutch pressure, shift timing and reliability under high load.

Micron-level precision

Every box is shimmed and blueprinted in-house for the right tolerances and long-term reliability.

Dyno and track proven

Validated on our Mainline ProHub dyno and in real competition: Time Attack UK and Race Wars UK.

Main clutch and baskets

Build the whole system right

The stock GR6 clutch packs are surprisingly capable, often holding 800bhp+ when properly calibrated. The real weak points are often overlooked: clutch baskets can crack or flex under repeated launches, and clutch seals degrade over time, causing pressure loss and inconsistent engagement.

So when we build a GR6, we inspect and upgrade far beyond the clutches. Whether you're aiming for 850bhp or 1,500bhp+, we spec the right clutch pack, baskets and supporting parts.

ETS / FWD clutch

Grip where it counts

The ETS (front-wheel-drive) clutch sends torque to the front wheels when traction demands it. On high-power cars the factory pack becomes a weak link: slip, overheating and eventually failure.

We rebuild it with our track-proven formula, including a ball bearing retainer to prevent a common internal failure, and set our own preload for strong front engagement.

Services

Gearbox work we do

Forged GR6 builds

Upgraded gearsets, clutch packs and full blueprinting for big power.

Valve body service

Main and oil pump valve bodies stripped, tested and rebuilt with OEM and upgraded parts. Restores consistent pressure and shift quality.

ETS / FWD clutch rebuilds

Rebuilt with our track-proven formula, ball bearing retainer and our own preload.

Upgraded circlips

A small part that protects a very expensive gearbox. Essential once power goes up.

Transmission service

Fluid, filters, magnets and inspection, with our reusable pan filter and magnet kit if you want it.

TCM tuning & relearns

Clutch relearns, shift optimisation and TCM calibration to match your power.

Diagnostics

Slow shifts, pressure loss or warning lights: we find the cause before it becomes a failure.

Call 01234 331613Book your car in